Re: Harp and guitar through Fender Concert



Spencer B. Gay writes:
> I am trying to set up a 1960 Fender Concert for harp playing. I am using a JT-30 with a volume controller through a Danelectro echo unit and the
> vibrato circuit on the Concert. 

I see a couple of problems here, one using the JT-30 into the
Danelectro, impedance mismatch.  You'll be losing output and bottom into
the Danelectro.  Volume controller?  As in a JT 30 with a volume control
or a seperate volume pedal?  The JT-30 with the onboard volume control
has a potentiometer value that's too low for the high impedance crystal
element of the mic.  I'm not really clear on what your goal or question
is.  This is a fine harmonica amp, yes you could plug the guitar into
the normal channel.  What isn't really working for you?  What speakers
are in  the amp?  Original Jensens?  Which version of the Concert is
this, the 6G12 or the 6G12A?  The 12a has 6 preamp tubes, the 6G12 just
5.  I think both were made in 1960.  By the way I used to gig with this
amp, mine's an early 1960 6G12 but I have also owned the 6G12A version. 
fjm





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.