Re: CX12 tight slide action



Dean,

you wrote:

< There is a white rubber "finger" mounted in the CX-12 shell, inside the gap 

< where the slide button stays.  This thing can be moved in or out, and I 
assume 
< it's purpose is to adjust tension on the slide. <

No, this thing serves as a damper to prevent a clicking noise when the slide 
knob 
is pushed in. The tension on the slide is maintained by the coiled spring.

CXfried 










This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.