Re: [Harp-L] burnishing +NEW PROTPTYPE AMRINE BAND!!!!!!!!!!!



<quote>
From: Bob Maglinte
To: Nicolas Fouquet
Sent: Thursday, September 23, 2004 1:17 PM
Subject: Re: [Harp-L] burnishing +NEW PROTPTYPE AMRINE BAND!!!!!!!!!!!

Hi Froggy,
Thanks for the info. I just hope that Hohner doesn't use a cap screw setup
that's used in the MS series, which cap screws are OK, but the material
being used for them are just god awful and the threads are OK, but the slot
that the screwdriver goes into gets mangled FAR too easily.
8<
Sincerely,
Barbeque Bob Maglinte
</QUOTE>

  The MS reedplate cap screws use a Posidrive #1 head, rather than Phillips.
Whilst its possible to use a Phillips #1 screwdriver with them, if you don't
use the correct screwdriver its easy to make a mess of the head.

-- G.





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.