[Harp-L] Re: mic cord?



Regarding the smaller size (3/8" vs. 5/8" diameter) screw-on connector used on those Japanese mics, Angela Instruments has the cable end connector to fit them.

http://www.angela.com/catalog/microphones/Microphones.html

scroll to item #9:

"9. Dearmond pickup screw-on connectors, manufactured by Switchcraft USA, similar in design to the screw-on connectors found on old ASTATIC JT-30 and other old type microphones but smaller in size, have spring and slotted-head set-screw for strain relief of cord, nickel plated, only two solder connections required to install these on the end of a conventional thin guitar cord. These fit old Dearmond jazz, round hole guitar and other type pickups EXACTLY. These suckers are hard to find! EACH $11. "






This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.