RE: [Harp-L] my valve setup



PT, Are there any problems with the ultrasuade or microfiber unraveling, or
do you coat them with something before cutting them?
Doyle
-----Original Message-----
From: harp-l-bounces@xxxxxxxxxx [mailto:harp-l-bounces@xxxxxxxxxx]On
Behalf Of PT Gazell
Sent: Tuesday, August 23, 2005 4:18 PM
To: harptalk@xxxxxxxxxxxxxxx
Cc: harp-l
Subject: Fw: [Harp-L] my valve setup



----- Original Message -----
From: "PT Gazell" <ptgazell@xxxxxxxxxxx>
To: <Captron100@xxxxxxx>
Sent: Tuesday, August 23, 2005 3:15 PM
Subject: Re: [Harp-L] my valve setup


> Go to your local fabric shop and ask for ultrasuede or microfiber...it
> will come in different thicknesses.
>
> PT Gazell
> pt@xxxxxxxxxxxx
> www.ptgazell.com
> http://www.sonicbids.com/PTGazell
> http://www.cdbaby.com/ptgazell
>
> ----- Original Message -----
> From: <Captron100@xxxxxxx>
> To: <harp-l@xxxxxxxxxx>
> Sent: Tuesday, August 23, 2005 1:35 PM
> Subject: [Harp-L] my valve setup
>
>
>>
>> In a message dated 8/22/2005 3:36:38 PM Eastern Standard Time,
>> harp-l-request@xxxxxxxxxx writes:
>>
>> Hi  Ron,
>> I have experimented with both covering the entire slot,  and leaving a
>> small
>> gap. I really don't notice much difference. I think before  Pat Missin
>> turned
>> me on to the microfiber material I'm now using, I left a  small gap to
>> lessen
>> the potential buzzing on the opposite reed. This newer  material (which
>> is not
>> in the photos) seems to eliminate the buzzing  altogether. So now I cut
>> the
>> microfiber to cover the whole slot. However, by  leaving a small gap you
>> get a
>> closer sound to a non valved reed by allowing  some air to get through.
>> This
>> is a small window because if you trim back to  much you will not be able
>> to do
>> the valve bend.
>> Hope this  helps.
>>
>>
>>
>> Thanks, PT.  That did help.  But u forgot to tell where we can  get that
>> new
>> windsaver material.
>> Anybody know?
>> ron
>> _______________________________________________
>> Harp-L is sponsored by SPAH, http://www.spah.org
>> Harp-L@xxxxxxxxxx
>> http://harp-l.org/mailman/listinfo/harp-l
>>
>


_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org
Harp-L@xxxxxxxxxx
http://harp-l.org/mailman/listinfo/harp-l





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.