RE: [Harp-L] class A



>From what I've read, apparently 2 tubes connected in "parallel"
can both still operate as Class A.  

Thanks to all those who responded.  I'll be jamming with it tonight.

Richard J. Smith, R.A.
Wormleysburg, PA


-----Original Message-----
From: harp-l-bounces@xxxxxxxxxx [mailto:harp-l-bounces@xxxxxxxxxx]On
Behalf Of SONNYTONE@xxxxxxx
Sent: Thursday, January 20, 2005 12:54 PM
To: harp-l@xxxxxxxxxx
Subject: [Harp-L] class A


Single ended, or one power tube, would be class A. You can also have Class A 
amps with two power tubes, our Sonny Jr one and two were both class A. Class A 
just means both power tubes are on simaltaneously all the time, class A/B 
means they oscillate on and off with each other at extremely high speed. That is 
the simplest way I think it can be put. If guys want to get into the cathode 
versus fixed bias, that's another topic. 
_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org
Harp-L@xxxxxxxxxx
http://harp-l.org/mailman/listinfo/harp-l





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.