[Harp-L] Dennis Kuchenreuther <kuchman1@yahoo.com>



Hi Dennis,
  McMaster & Carr
http://www.mcmaster.com
phillips flat head, 1-72, 1/2" length, stainless steel machine screws
knurled threaded inserts, 1-72

Take care with the comb, the plastic is rigid and can crack easily, drill
carefully.  Use araldyte to epoxy the inserts in place, use vaseline on the
machine screw thread it into the insert, then press it into the hole.
 Dimensions of the knurled threaded inserts should be included on their
datasheet on the site.

Cheers,
-- G.

Date: Thu, 6 Oct 2005 11:54:08 -0700 (PDT)
From: Dennis Kuchenreuther <kuchman1@xxxxxxxxx>
Subject: [Harp-L] Threaded Inserts
To: Harp-L@xxxxxxxxxx
>
>Can anyone point me in the right direction on how to
>obtain the appropriate size threaded insert(s) to
>attach the mouthpiece to a Hering Velvet Voice 48
>chromatic.
>
>Right now the two Herings that I have both use self
>tapping screws to hold the mouthpiece to the plastic
>comb. Both have loosened up and I would like to put
>some threaded inserts in the comb and use the
>appropriate size screws to hold the mouthpiece in
>place. 
>
>Any help on where I can obtains the screws and
>inserts, along with the correct size, would be
>appreciated.
>
>Dennis





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.