[Harp-L] Installing switchcraft connectors



Hi All
I have some switchcraft screw on connectors (like the ones on old JT30's) The male that is installed in the mic comes with four washers and a threaded locking ring to hold it all together. Is it necessary to use all the washers? Can anyone explain the purpose of these washers?
The female connector that goes on the cable is soldered at the centre and the rest of the cable is secured by the spring and set screw?
I am new to installing these connectors so any tips would be great


Thanks
  Christopher B




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.