Re: [Harp-L] PA settings for 545



Kevin, when I plug into a PA, regardless of mic, I will generally start with the mids around 7 the bass around 5 and treble around 2.  I'll step out in front of the speakers, blow a little, and season to taste.  I find the heavier mid gets you right in the thick of the mix with the band.

Jim. 

>>> Kevin M Brown <kevin.brown@xxxxxxxxxxxxx> 12/12/2006 11:43 PM >>>
I'm looking for any tips on PA channel tone control settings for  
playing a harp thru a shure 545s straight into the PA (a la  
Butterfield)  - i have mainly played thru bullets or JT30s into an amp  
(currently blues junior) and for these I have the settings around bass  
12 (highest) with treble and mid turned right down to 1. It's a very  
long time since i've not gone thru an amp.

Tomorrow's gig I'll be without my amp. A good chance to give the GB  
and JT-30 a rest and take the 545s (good enough for PB should be good  
enough for me!). It will be straight into the PA with no effects  
(don't own any).

Should i try to reproduce my usual amp tone settings on the PA? I'm  
expecting there to be the usual treble, mid, bass and gain controls on  
the PA channel (which is hired). That would mean down on treble and  
mid, up on bass and probably a touch of gain but not too much to cause  
feedback problems (at least i have the on/off switch on the 545). I  
play fairly similar stuff and style to Butterfield and like a pretty  
compressed sound usually. This should come from the cupping etc.  
anyway. I'm not fixated on trying to sound just like PB (as if) just  
hoping you might have some tips to get a reasonable sound that will  
save me a set and half of experimenting - twiddling the controls.  
Thanks, kevin.



_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org 
Harp-L@xxxxxxxxxx 
http://harp-l.org/mailman/listinfo/harp-l






This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.