[Harp-L] Re: reedplate covers



All the plating on cars, motorcycles, household stuff etc. was nickel at one time. Chrome plating didn't come till later, probably the forties at a guess. It is more durable than nickel, and probably cheaper in the long run.
RD

>>> "Dave Payne Sr." <payneoutdoors@xxxxxxxxx> 1/11/2007 13:35 >>>
Glenn, 
   
  All the old Hohners I've seen  from the 1930s up until a few years ago used nickel-plated steel, it was a thin plate of nickel alloy and doesn't always keep the steel from rusting. As far as I know, they are using chromium plated steel now. I've got one Marine Band from around 2000, I actually removed all the plating and polished the steel. I don't doubt that some are brass, but I've not seen a Hohner or every day run of the mill harp that didn't have a steel coverplate. I'm assuming, and only assuming, that nickel plating steel was a cheaper way to make a harp that didn't rust inside the box. Victorinox has been making stainless steel since the first Marine Bands, so it definitely was available to Hohner, but likely far cheaper for Hohner to use nickel alloy, but I have no idea what all is in that alloy. I doubt its anything close to pure nickel. The prewar Seydels I've seen also appear to be made out of the same stuff. 
  Keep in mind, my experience is all with German harps and to some extent, U.S.-made harps. 
   
  Dave Payne Sr. 


__________________________________________________________________
Dave Payne Sr. 
Elk River Harmonicas 
Seydel dealer and maker of the Elk River Special Harmonica
P.O. Box 3382
Parkersburg WV 26103
 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
Harp-L is sponsored by SPAH, http://www.spah.org 
Harp-L@xxxxxxxxxx 
http://harp-l.org/mailman/listinfo/harp-l





This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.