Re: [Harp-L] CR/CM Element repairs



I once knew this guy in New York who did this repair work but can't remember
who it is.   That's all the narrowing down I can give you.
Re: low Z....I've put hi Z trannies in many low Z CM's and they usually work
good.  I do have one low Z Black Label CR that didn't sound very good with
the HiZ tranny, so go figure that one.  Although, I've got an LR mod and
then ran through another type of  tranny that  I'll be testing with this
particular element when I get a chance.  The calculations seem promising.

hope that helps.
On 9/8/07, Paul Routledge <kingleyharp@xxxxxxxxxxxxxx> wrote:
>
> I seem to recall reading somewhere that there is a guy who can repair
> CR/CM elements and even convert Low Z to Hi Z.
> Does anyone have the contact details for this guy?
>
> Paul
> www.kingleyharp.co.uk
>
> _______________________________________________
> Harp-L is sponsored by SPAH, http://www.spah.org
> Harp-L@xxxxxxxxxx
> http://harp-l.org/mailman/listinfo/harp-l
>



-- 
steve
www.thunderharpmics.com
fattest tone on earth!




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.