Re: [Harp-L] stacking harp amps



http://www.netads.com/~meo/Guitar/Amps/Kalamazoo/Mods/ezlo.html

And this circuit from the Kalamazoo Amp Field Guide


----- Original Message ----- 
From: "Splash" <celtiac@xxxxxxxxx>
To: <harp-l@xxxxxxxxxx>
Sent: Saturday, April 11, 2009 2:26 PM
Subject: Re: [Harp-L] stacking harp amps


> A quick Google found this:
>
> From "Lord Valve"  line-out for a champ, or any other single-ended amp
> quote"put a 1.5K resistor in series with the output, and
> use a 150-ohm resistor to ground right after the 1.5K. Output
> is taken from the junction of the 1.5K/150-ohm network. If you
> want adjustable output, put a 50K pot in parallel with the
> divider network and take the output from the wiper." ---end quote
>
> Torres makes a kit.
>
> http://www.torresamps.com/simple_amp_mod_kits.htm
>
> Actually, the easiest way to stack amps is to plug your mic into input one
> on the first amp, and then run a cable from input 2 in the first amp to
> input 1 on the second amp.  Or if you want the second amp to have more of
> the signal. plug into jack 2 on the 1st amp and cable from jack 1.  There
is
> usually more "R" in jack 2.
>
> Splash
>
> ----- Original Message ----- 
> From: "John Hegedus" <johnhegedus@xxxxxxx>
> To: <harp-l@xxxxxxxxxx>
> Sent: Saturday, April 11, 2009 1:55 PM
> Subject: [Harp-L] stacking harp amps
>
>
> > Can anyone tell me how to stack harp amps for a better sound like Mark
> > Wenner's rig? I have a Silvertone 1481 and I want to hook it up to a
> > bassman. I like the sound that the 1481 produces but I would like it
> > louder and not quite a dirty as the 1481. The 1481 does not have a
> > line out.  Any info would be greatly appreciated.  Also, how is my
> > buddy and one of the greatest harp players in the Pittsburgh area
> > (Frank Franz) doing these days doing?
> > _______________________________________________
> > Harp-L is sponsored by SPAH, http://www.spah.org
> > Harp-L@xxxxxxxxxx
> > http://harp-l.org/mailman/listinfo/harp-l
>




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.