[Harp-L] RE: amplifier stands



Howard,
No problem with your idea either, I was simply trying to provide some
options for the 
original poster. The 'cheap steel tubing contraption' carries a 4 1/2 star
out of 5
rating so some explanation might be in order for your characterization? The
genuine
Fender tilt-back legs may be just the item for a Sonny Jr 410 however. Twice
the money, 
but they are genuine Fender. If I went this route, I'd find a way to mount
them inside
the cabinet to avoid marring the outside of that Sonny Jr 410 finish though.
If I owned
a Sonny Jr 410, I don't think I'd be too eager to be drilling holes through
my tweed 
finish, but that's a personal point of view.

bill otten

-----Original Message-----
From: Howard Chandler [mailto:h_chandler@xxxxxxxxxxxxx] 
Sent: Saturday, February 21, 2009 12:00 AM
To: Bill Otten
Cc: harp-l@xxxxxxxxxx
Subject: Re: [Harp-L] RE: amplifier stands


How about a pair of genuine Fender tilt-back legs?  They'll hold up a 
lot longer that a cheap steel tubing contraption.

http://accessories.musiciansfriend.com/product/Fender-TiltBack-Legs-19-Inch?
sku=454201

Bill Otten wrote:
> Mike Randall asked:
> "i am looking for an amp stand for a larger amp(sonny jr.410). does anyone
> know where to find one.it has an open back and most of the ones i looked
for
> on line fall into open area in back of amp and will not support the back
of
> it"
>
> Mike you might want to check out something like this:
>
http://accessories.musiciansfriend.com/product/Musicians-Gear-Large-Folding-
> Tiltback-Amp-Stand?sku=450728
> or if you're a creative type create your own out of inexpensive and
> lightweight PVC pipe (actually pretty cool):
> http://www.instructables.com/id/PVC-guitar-amplifier-stand/
>
> bill otten




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.