[Harp-L] Fw: Adding volume control to a vintage 545SD



A volume pot shunts a variable amount of signal to ground.
A switch sends all the signal to gnd, or nothing.

Splash!

----- Original Message ----- 
From: "Jens Juel" <jensjuel@xxxxxxxxxxxx>
The easily accesible wires on the
>> on/off switch is of no use, as they only serve the purpose of shorting
>> the signal to ground in off-position.

True enough,  but that'll not be the "normal" way to build a volume 
control, where you usually take out the signal on the wiper
It will probably affect characteristics. Anyway I'll try it out - it might 
work....;-)

Thanx and all the best

Jens Juel




This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.