Re: [Harp-L] amp stand recommendation



I made an amp stand out of a milk crate.  I cut it with a jig saw after
marking the cut lines with masking tape. It lifts the amp up off the floor
and tilts it back. Works good, very inexpensive, holds cords, etc.

On Sun, Jan 30, 2011 at 8:51 AM, fjm <bad_hat@xxxxxxxx> wrote:

> Is anyone aware of a more locally made product?  The stands that have been
> listed so far seem quite affordable and well made but they arrive by way of
> a long slow boat trip from another distant part of this world.  fjm
>



This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.