[Harp-L] Opening up the cover plates





I bought a sheet metal crimping tool and bench-ground it to the right width, taped edges with electrical tape : perfect clean cover plate bending/crimping/opening every time. I can supply info on the specific tool (can't recall off the top of my head butavailable at Lowes/Home depot) if anyone is interested. Any form of pliers leave uneven edges and irregularities that look crappy, even if you use tape or wood to soften the edges. 



Or you can switch to B Radicals: they are wide open and the loudest harps on the market! 



Zig


This archive was generated by a fusion of Pipermail 0.09 (Mailman edition) and MHonArc 2.6.8.